| Wisdom Connects Everything, Enable Digitalization |
SUNPN LED Swimming Pool Water Quality Notice Board | Residual Chlorine & pH Display Screen Case Study
SUNPN LED Swimming Pool Water Quality Notice Board Case Study
Previously, pool water quality was tested manually a few times a day and recorded in a notebook. Regulators require continuous records, and members could not see the data. SUNPN installed an LED Pool Water Quality Notice Board at the pool entrance, displaying water temperature, pH, pool residual chlorine, and footbath residual chlorine for reading upon entry.
1. Project Background & Customer Requirements
Pool water must stay within standards for long periods, but manual testing is discrete. A morning test may be compliant, but after peak hours the water may change; record books cannot show this. Dosing relies on experience: too little means insufficient disinfection, too much causes pungent chlorine.
1.1 Traceable Records
Health inspections usually require water records; the frequency and authenticity of manual records are easily questioned.
1.2 Swimmers’ Right to Know
More swimmers check for notices before entering, especially parents. Without a notice, even compliant water is doubted.2. SUNPN LED Water Quality Display Solution Introduction
2.1 Real-time Residual Chlorine and pH Data Display Function
This SUNPN pool water quality notice board connects to water quality sensors to auto-collect residual chlorine and pH data without manual input. Data updates in real time on the LED screen for visitors and pool staff to view directly. Value threshold alerts are supported. Parameters will change color when out of safe ranges, helping operators adjust water treatment chemicals promptly and satisfy pool water quality disclosure regulations.2.2 Features of the Swimming Pool Water Quality Notice Board
- High-brightness outdoor LED tubes, clear to read under sunlight.
- Works with multiple sensors; water temperature, turbidity and other items can be added.
- Reliable signal transmission, supports 24-hour continuous running.
- Custom size and layout to match site requirements.
- Easy operation and maintenance, fit for swimming pools and water parks.
3. On-site Installation & Display Effect
Data is not manually entered; it comes from three stages.
3.1 Circulating Sampling
A water quality analysis cabinet connects to the circulation pipeline via a sampling pump. Pool water flows through a 2 cm corrosion-resistant pipe into the cabinet, forming a flowing sample and avoiding stagnant sampling points.3.2 Sensor Detection
The cabinet has sensors for water temperature, pH, residual chlorine, etc., testing the flowing sample continuously all day.3.3 Transmission to Screen
Results are sent to the LED Pool Water Quality Notice Board by wire or wirelessly and refreshed at a set frequency. If the network fails, the screen displays locally and backfills after recovery.
4. Advantages of SUNPN Pool Water Quality LED Screen
4.1 Continuous records: all-day operation automatically generates records and reports for inspection.
4.2 Less manual work: inspection and transcription workload drops; dosing is evidence-based.
4.3 Earlier response: alerts via platform, SMS, or APP when thresholds are exceeded.
4.4 Information disclosure: swimmers check data themselves, reducing explanation costs.
5. Related Water Quality Display Solutions
By terminal and entry method:
5.1 LED water quality notice screen manual input package: screen plus remote control, lower investment.
5.2 LED automatic acquisition package: analysis cabinet plus LED notice screen for automatic upload; mainstream choice.
5.3 LCD manual input package: includes gateway host; more flexible layout.
5.4 LCD automatic acquisition package: supports networking and multi-terminal synchronization.
5.5 Floor-standing all-in-one package: 43-inch all-in-one with analysis cabinet; suitable for club pools.
6. Hardware Products of the SUNPN Water Quality Online Monitoring System
The SUNPN water quality detection system includes a water quality analysis cabinet with sensors for water temperature, pH, ORP, residual chlorine, and turbidity; display terminals including LED digital tube screens, LCD screens, or floor-standing all-in-one machines; network devices such as gateway hosts and switches; and accessories such as sampling pumps, pipes, and valves. Modular design can connect to dosing systems.
7. FAQs About the Water Quality Notice Board
Q1:How accurate is the data?
It depends on sensor accuracy and installation standards; periodic calibration is required.Q2:What if the network fails?
The notice board displays locally and backfills after recovery.Q3:Can older venues install it?
Yes; connect to the circulation pipeline and power supply without affecting business.
This LED Pool Water Quality Notice Board also suits water parks, club pools, and hotel pools. SUNPN provides solution design and installation training and accepts OEM customization and engineering cooperation.